SeaKlear Phosphate Remover is proven to eliminate phosphates from fertilizers, rainwater, soaps, decaying vegetation, and other pollutants. This product keeps salt generators working properly. Removing organic contaminants will keep equipment running efficiently. Phosphate Remover will also help to keep pool chemistry balanced. This product is environmentally safe and will not harm plants or animals.

 

Dosage 1 oz. per 5,000 gallons per week to maintain phosphate levels below 125 ppb.

 

Use this product to help in the removal of phosphates in your pool.

This product works great when combined with a natural clarifier.

 

 

Clean or backwash filter.

Calculate the amount of product required using the dosage guide.

Pour SeaKlear Phosphate Remover in the pool, distributing it over as wide an area as possible.

Then treat with SeaKlear Natural Clarifier at a rate of 2 oz. per 5,000 gallons.

Run your filter system continuously for at least 24 hours.

If filter pressure increases 10 psi. over normal, clean or backwash the filter.

After 48 hours test the phosphate level with a phosphate test kit approved for swimming pool use.

If it is needed, reapply SeaKlear Phosphate Remover.

 

Note: It is normal for SeaKlear Phosphate Remover to cause pool cloudiness.